Consumables & expendables · Spec-Crosswalk

ASTM D6576

ASTM ASTM D6576

No qualified-products (QPL / ASSIST) export loaded for this specification yet — members below come from codification and manufacturer sources; QPL membership lands with the data cycle.

← Search another part, spec or stock number

Other lines of ASTM ASTM D6576

The same document's other types, classes and grades — each its own crosswalk family.

10150390 NIMIKKEISTOKESKUS NCB FINLAND

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-00-935-9144 →WIDTH: 36.000 INCHES MINIMUM AND 36.750 INCHES MAXIMUM LENGTH: 36.000 INCHES MINIMUM AND 36.750 INCHES MAXIMUM THICKNESS: 0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

10150395 NIMIKKEISTOKESKUS NCB FINLAND

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-161-3670 →WIDTH: 36.000 INCHES MINIMUM AND 36.750 INCHES MAXIMUM LENGTH: 36.000 INCHES MINIMUM AND 36.750 INCHES MAXIMUM THICKNESS: 0.125 INCHES MINIMUM AND 0.251 INCHES MAXIMUM MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

1083H10-H205 NORTHROP GRUMMAN SYSTEMS CORPORATIO

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-041-8691 →CROSS-SECTIONAL WIDTH: 0.093 INCHES NOMINAL MATERIAL: RUBBER CHLOROPRENE CLASS CR MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6130, TYPE 2, GRADE A, CONDITION MEDIUM MIL SPEC SINGLE MATERIAL RESPONSE

FLIS · DLA Logistics Information Services (FLIS)

1084H02-H03 NORTHROP GRUMMAN SYSTEMS CORPORATIO

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-073-2318 →CROSS-SECTIONAL WIDTH: 0.500 INCHES NOMINAL MATERIAL: RUBBER CHLOROPRENE CLASS CR MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6130, TYPE 2, GRADE A, CONDITION MEDIUM MIL SPEC SINGLE MATERIAL RESPONSE

FLIS · DLA Logistics Information Services (FLIS)

4047-1257PIECE 18,19 HUNTINGTON INGALLS INC

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

4751-27 MINISTERIE VAN DEFENSIE

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-00-526-6900 →WIDTH: 23.750 INCHES MINIMUM AND 24.250 INCHES MAXIMUM LENGTH: 23.750 INCHES MINIMUM AND 24.250 INCHES MAXIMUM THICKNESS: 0.937 INCHES MINIMUM AND 1.063 INCHES MAXIMUM MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

8636028 U S ARMY ARMAMENT RESEARCH &

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-00-526-6900 →WIDTH: 23.750 INCHES MINIMUM AND 24.250 INCHES MAXIMUM LENGTH: 23.750 INCHES MINIMUM AND 24.250 INCHES MAXIMUM THICKNESS: 0.937 INCHES MINIMUM AND 1.063 INCHES MAXIMUM MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

9320PL0844006 JEDNOLITY INDEKS MATERIALOWY -

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-00-935-9144 →WIDTH: 36.000 INCHES MINIMUM AND 36.750 INCHES MAXIMUM LENGTH: 36.000 INCHES MINIMUM AND 36.750 INCHES MAXIMUM THICKNESS: 0.437 INCHES MINIMUM AND 0.563 INCHES MAXIMUM MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

D4059-523 PC8 HUNTINGTON INGALLS INC

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-179-6483 →WIDTH: 23.975 INCHES MINIMUM AND 24.025 INCHES MAXIMUM LENGTH: 23.975 INCHES MINIMUM AND 24.025 INCHES MAXIMUM THICKNESS: 0.046 INCHES MINIMUM AND 0.109 INCHES MAXIMUM MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

D91312345 PARKER-HANNIFIN CORP

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-370-9507 →WIDTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM LENGTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM THICKNESS: 0.312 INCHES NOMINAL MATERIAL: RUBBER
NSN 9320-01-679-8571 →no stated characteristics

FLIS · DLA Logistics Information Services (FLIS)

D91312346 PARKER-HANNIFIN CORP

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-370-9506 →WIDTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM LENGTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM THICKNESS: 0.188 INCHES NOMINAL MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

LL-HX8-3590 DEFENSE LOGISTICS AGENCY DBA

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-370-9506 →WIDTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM LENGTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM THICKNESS: 0.188 INCHES NOMINAL MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

LL-HX8-3591 DEFENSE LOGISTICS AGENCY DBA

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-370-9507 →WIDTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM LENGTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM THICKNESS: 0.312 INCHES NOMINAL MATERIAL: RUBBER

FLIS · DLA Logistics Information Services (FLIS)

LO8005 DLA WEAPONS SUPPORT (COLUMBUS)

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-370-9506 →WIDTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM LENGTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM THICKNESS: 0.188 INCHES NOMINAL MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

LO8006 DLA WEAPONS SUPPORT (COLUMBUS)

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-370-9507 →WIDTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM LENGTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM THICKNESS: 0.312 INCHES NOMINAL MATERIAL: RUBBER

FLIS · DLA Logistics Information Services (FLIS)

LS5352 LOCKHEED MARTIN CORP

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9390-00-769-4685 →OVERALL WIDTH: 0.600 INCHES NOMINAL FIRST TIP WIDTH: 0.200 INCHES NOMINAL OVERALL HEIGHT: 0.500 INCHES NOMINAL MATERIAL: RUBBER BUTADIENE-STYRENE CLASS SBR

FLIS · DLA Logistics Information Services (FLIS)

MILR6130BTYPE2G RA24X24 1-16THK ZF INDUSTRIEANTRIEBE WITTEN GMBH

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-179-6483 →WIDTH: 23.975 INCHES MINIMUM AND 24.025 INCHES MAXIMUM LENGTH: 23.975 INCHES MINIMUM AND 24.025 INCHES MAXIMUM THICKNESS: 0.046 INCHES MINIMUM AND 0.109 INCHES MAXIMUM MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

P00203NRP DEFENSE LOGISTICS AGENCY DBA

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-370-9507 →WIDTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM LENGTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM THICKNESS: 0.312 INCHES NOMINAL MATERIAL: RUBBER

FLIS · DLA Logistics Information Services (FLIS)

PO0065NRP DEFENSE LOGISTICS AGENCY DBA

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-01-370-9506 →WIDTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM LENGTH: 18.000 INCHES MINIMUM AND 20.000 INCHES MAXIMUM THICKNESS: 0.188 INCHES NOMINAL MATERIAL: RUBBER CHLOROPRENE CLASS CR

FLIS · DLA Logistics Information Services (FLIS)

R11494 SAINT-GOBAIN PERFORMANCE PLASTICS

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 9320-00-060-0622 →CROSS-SECTIONAL WIDTH: 0.750 INCHES NOMINAL LENGTH: 18.000 INCHES NOMINAL MATERIAL: RUBBER POLYISOPRENE NATURAL CLASS NR MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-6130, TYPE 2, GRADE C, CONDITION SOFT MIL SPEC SINGLE MATERIAL RESPONSE

FLIS · DLA Logistics Information Services (FLIS)

Watch this family. We’ll alert you when its restriction status changes or a new qualified alternative lands.
Staying inside the regulation — routes from candidate to approved

Codification and qualification say who vouches for a part — they are not installation eligibility. Under EASA Part-21, eligibility flows from the approved design (type design / IPC) or an approved change; under Part-145, acceptance needs an EASA Form 1 or, for genuine standard parts, conformity traceable to the officially recognised standard (145.A.42).

  1. Classify the part. Is it a GENUINE standard part? If the IPC/CMM references only a public specification (AN/MS/NAS/SAE-AS/ISO/EN) with no OEM source-control drawing, buy at source with conformity traceable to that standard.
  2. Check for an approved alternate. The IPC/CMM/vendor list may already carry an alternate part number or vendor code — an already-approved alternate needs no new approval.
  3. Ask the design approval holder. Request the source-control data, written equivalence, or addition of the alternative source to the approved data. Document a refusal.
  4. Raise a design change. Via a Part-21J DOA (or EASA/ADOA): a 21.A.95 minor change adding the alternate to the approved data, backed by an identicality/equivalence file — dimensions, material, class, load rating, lubricant/seal, corrosion protection, acceptance criteria. Critical applications escalate to major change/STC.
  5. FAA-PMA / BASA path. Where the product is also FAA-certificated: PMA parts reach EASA aircraft under the BASA/TIP (non-critical directly; critical via EASA-validated STC).
  6. Production, release, traceability. Approved parts are produced under a POA, released on an EASA Form 1 (marked EPA where applicable), with EN/AS 9120-grade traceability into Part-145/CAMO acceptance.

Stage 1(a): we assemble the equivalence/identicality starter file — the cited evidence this graph holds, shaped for your DOA or compliance department to take forward. See pricing.

Regulatory explainer, not legal advice: paragraph numbers, derogations and the BASA/TIP revision change — verify against the current consolidated Regulation (EU) 748/2012, the EASA Easy Access Rules and the current TIP, and engage your DOA and competent authority early.

This crosswalk identifies candidate equivalents with cited evidence. It is not an airworthiness approval. Substitution decisions remain subject to your organisation’s procurement and engineering approval process and the governing maintenance data (AMM/CMM/SRM/CML/OMAT).