Consumables & expendables · Spec-Crosswalk

MIL-I-22076

MIL MIL-I-22076

No qualified-products (QPL / ASSIST) export loaded for this specification yet — members below come from codification and manufacturer sources; QPL membership lands with the data cycle.

← Search another part, spec or stock number

32 members, grouped by the makers' own part-number structure — open a family to see its graded, cited rows.

3-810 LOCKHEED MARTIN CORPORATION

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

12Z7018-1383 NAVAL ORDNANCE STANDARDS

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

118A1641P16 LOCKHEED MARTIN CORPORATION

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

118A1641P25 LOCKHEED MARTIN CORPORATION

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 5970-00-615-5532 →WALL THICKNESS: 0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 630.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.500 INCHES MINIMUM AND 0.524 INCHES MAXIMUM COLOR: CLEAR

FLIS · DLA Logistics Information Services (FLIS)

118A1641P126 LOCKHEED MARTIN CORPORATION

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

3002 MINNESOTA MINING AND MFG CO 3M

CONFIRMED

Codified interchangeability (FLIS I&S)

qualified at 2 sites: MINNESOTA MINING AND MFG CO 3M · 3M CO ADMININISTRATIVE ELECTRONIC &

FLIS · DLA Logistics Information Services (FLIS)

415191-18-B NAVAL AIR WARFARE CENTER AIRCRAFT

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 5970-00-636-1771 →no stated characteristics

FLIS · DLA Logistics Information Services (FLIS)

2686572-12 NAVAIR AND NAVSEA MANAGED ORIGINAL

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

7472368-25 LOCKHEED MARTIN CORPORATION

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

7472368-116 LOCKHEED MARTIN CORPORATION

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 5970-00-552-9567 →WALL THICKNESS: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 700.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.182 INCHES MINIMUM AND 0.198 INCHES MAXIMUM COLOR: CLEAR

FLIS · DLA Logistics Information Services (FLIS)

7956567-71 LOCKHEED MARTIN CORP

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

7956567-77 LOCKHEED MARTIN CORP

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 5970-00-636-1771 →no stated characteristics

FLIS · DLA Logistics Information Services (FLIS)

8034668-26 US ARMY AVIATION AND MISSILE COMMAND

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

8034668-148 US ARMY AVIATION AND MISSILE COMMAND

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 5970-00-552-9567 →WALL THICKNESS: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 700.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.182 INCHES MINIMUM AND 0.198 INCHES MAXIMUM COLOR: CLEAR

FLIS · DLA Logistics Information Services (FLIS)

9025772 US ARMY AVIATION AND MISSILE COMMAND

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

ASTRA 701 ATKINS & PEARCE, INC

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

ASTRA 701 ESSEX GROUP INC SUFLEX/IWP DIV

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 5970-00-051-6514 →WALL THICKNESS: 0.010 INCHES MINIMUM AND 0.014 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 750.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.025 INCHES MINIMUM AND 0.032 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-056-8684 →WALL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 750.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM COLOR: BLACK
NSN 5970-00-057-9973 →WALL THICKNESS: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 430.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 1.250 INCHES MINIMUM AND 1.290 INCHES MAXIMUM COLOR: WHITE
NSN 5970-00-057-9974 →WALL THICKNESS: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 350.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 2.000 INCHES MINIMUM AND 2.070 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-057-9987 →WALL THICKNESS: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 525.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.750 INCHES MINIMUM AND 0.786 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-060-3753 →WALL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 750.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.051 INCHES MINIMUM AND 0.061 INCHES MAXIMUM COLOR: CLEAR

FLIS · DLA Logistics Information Services (FLIS)

FE16CSW000 MARKEL CORP.

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

FLEXITE E MARKEL CORP.

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

FLEXITE STANDARD MARKEL CORP.

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 5970-00-057-9987 →WALL THICKNESS: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 525.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.750 INCHES MINIMUM AND 0.786 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-067-5172 →WALL THICKNESS: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 525.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.875 INCHES MINIMUM AND 0.911 INCHES MAXIMUM COLOR: BLACK
NSN 5970-00-105-6163 →no stated characteristics
NSN 5970-00-221-5305 →WALL THICKNESS: 0.028 INCHES MINIMUM AND 0.033 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 570.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.445 INCHES MINIMUM AND 0.470 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-221-5308 →WALL THICKNESS: 0.018 INCHES MINIMUM AND 0.023 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 700.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.355 INCHES MINIMUM AND 0.375 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-227-9278 →no stated characteristics

+67 more NSNs held — contact atas.aero for a breakdown

FLIS · DLA Logistics Information Services (FLIS)

GLITEX 120 NALGE CO DIV OF SYBRON CORP

CONFIRMED

Codified interchangeability (FLIS I&S)

NSN 5970-00-051-6514 →WALL THICKNESS: 0.010 INCHES MINIMUM AND 0.014 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 750.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.025 INCHES MINIMUM AND 0.032 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-056-8684 →WALL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 750.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.102 INCHES MINIMUM AND 0.112 INCHES MAXIMUM COLOR: BLACK
NSN 5970-00-057-9973 →WALL THICKNESS: 0.035 INCHES MINIMUM AND 0.045 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 430.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 1.250 INCHES MINIMUM AND 1.290 INCHES MAXIMUM COLOR: WHITE
NSN 5970-00-057-9974 →WALL THICKNESS: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 350.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 2.000 INCHES MINIMUM AND 2.070 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-057-9987 →WALL THICKNESS: 0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 525.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.750 INCHES MINIMUM AND 0.786 INCHES MAXIMUM COLOR: CLEAR
NSN 5970-00-060-3753 →WALL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 750.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.051 INCHES MINIMUM AND 0.061 INCHES MAXIMUM COLOR: CLEAR

+170 more NSNs held — contact atas.aero for a breakdown

FLIS · DLA Logistics Information Services (FLIS)

GMS5-13-29-8 LOCKHEED MARTIN CORPORATION

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

GMS5-13-31-0 LOCKHEED MARTIN CORPORATION

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

HYFLEX TRANSFLEX 3M CO ADMININISTRATIVE ELECTRONIC &

CONFIRMED

Codified interchangeability (FLIS I&S)

qualified at 2 sites: 3M CO ADMININISTRATIVE ELECTRONIC & · MINNESOTA MINING AND MFG CO 3M

FLIS · DLA Logistics Information Services (FLIS)

ITCO 919 PEXCO LLC

CONFIRMED

Codified interchangeability (FLIS I&S)

FLIS · DLA Logistics Information Services (FLIS)

limit reached — 7 more held · contact atas.aero for a breakdown

Watch this family. We’ll alert you when its restriction status changes or a new qualified alternative lands.
Staying inside the regulation — routes from candidate to approved

Codification and qualification say who vouches for a part — they are not installation eligibility. Under EASA Part-21, eligibility flows from the approved design (type design / IPC) or an approved change; under Part-145, acceptance needs an EASA Form 1 or, for genuine standard parts, conformity traceable to the officially recognised standard (145.A.42).

  1. Classify the part. Is it a GENUINE standard part? If the IPC/CMM references only a public specification (AN/MS/NAS/SAE-AS/ISO/EN) with no OEM source-control drawing, buy at source with conformity traceable to that standard.
  2. Check for an approved alternate. The IPC/CMM/vendor list may already carry an alternate part number or vendor code — an already-approved alternate needs no new approval.
  3. Ask the design approval holder. Request the source-control data, written equivalence, or addition of the alternative source to the approved data. Document a refusal.
  4. Raise a design change. Via a Part-21J DOA (or EASA/ADOA): a 21.A.95 minor change adding the alternate to the approved data, backed by an identicality/equivalence file — dimensions, material, class, load rating, lubricant/seal, corrosion protection, acceptance criteria. Critical applications escalate to major change/STC.
  5. FAA-PMA / BASA path. Where the product is also FAA-certificated: PMA parts reach EASA aircraft under the BASA/TIP (non-critical directly; critical via EASA-validated STC).
  6. Production, release, traceability. Approved parts are produced under a POA, released on an EASA Form 1 (marked EPA where applicable), with EN/AS 9120-grade traceability into Part-145/CAMO acceptance.

Stage 1(a): we assemble the equivalence/identicality starter file — the cited evidence this graph holds, shaped for your DOA or compliance department to take forward. See pricing.

Regulatory explainer, not legal advice: paragraph numbers, derogations and the BASA/TIP revision change — verify against the current consolidated Regulation (EU) 748/2012, the EASA Easy Access Rules and the current TIP, and engage your DOA and competent authority early.

This crosswalk identifies candidate equivalents with cited evidence. It is not an airworthiness approval. Substitution decisions remain subject to your organisation’s procurement and engineering approval process and the governing maintenance data (AMM/CMM/SRM/CML/OMAT).