Approved sources
Every maker's reference the catalogue files against this item of supply — the parts someone holding this number can use. The design-control reference is the one that controls the item; a secondary reference is a real codified fact and a weaker one.
OEM source-control number — the OEM’s own reference for this item; the sources beneath answer it. All of this OEM’s references →
INSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
8034661-18 US ARMY AVIATION AND MISSILE COMMAND (18876)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
INSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
P5014-3J LOCKHEED MARTIN CORPORATION (81755)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
3002 3M COMPANY (76381)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
3002 MINNESOTA MINING AND MFG CO 3M (75037)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
74026170 DU MONT TELEVISION AND RADIO CORP (00530)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
807895-280 NAVAIR AND NAVSEA MANAGED ORIGINAL (10001)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
ASTRA 701 ESSEX GROUP INC SUFLEX/IWP DIV (91094)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
GLITEX 120 NALGE CO DIV OF SYBRON CORP (05178)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
NATVAR 361 HIGH VOLTAGE ENGINEERING CORP NATVAR (96904)
POSSIBLE
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
INSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
Historical & informational references
Numbers the catalogue records against this item but marks as not for procurement — withdrawn entries, information-only listings, drawings, and references that need more than the number to identify the item. If you arrived holding one of these, this is the item it points to; the sources above are what can actually be used.
INSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
INSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
8520878 US ARMY AVIATION AND MISSILE COMMAND (18876)
WITHDRAWN
INSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
G302783-6203 A T AND T TECNOLOGIES INC SUB OF (92674)
WITHDRAWN
INSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
G302783-6203 AMERICAN TELEPHONE AND TELEGRAPH CO (64959)
WITHDRAWN
INSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
G302783-6203 BORDEN CHEMICAL CO RESINITE DEPT (14429)
WITHDRAWN
INSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
G302783-6203 LUCENT TECHNOLOGIES INC ADVANCED (01714)
WITHDRAWN
INSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
Stated characteristics
The codification record's own dimensions and material statements — official, and public by nature.
WALL THICKNESS0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUMFLIS characteristics (MRC)
RELIABILITY INDICATORNOT ESTABLISHEDFLIS characteristics (MRC)
INSIDE DIAMETER0.229 INCHES MINIMUM AND 0.249 INCHES MAXIMUMFLIS characteristics (MRC)
TEMP RATING-67.8 CELSIUSFLIS characteristics (MRC)
ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND OIL RESISTANTFLIS characteristics (MRC)
MINIMUM TENSILE STRENGTH1800 POUNDS PER SQUARE INCHFLIS characteristics (MRC)
FLEXIBILITYFLEXIBLEFLIS characteristics (MRC)
COLORBLACKFLIS characteristics (MRC)
MATERIALPLASTIC POLYVINYL CHLORIDE (PVC) OR PLASTIC POLYVINYL CHLORIDE-ACETATEFLIS characteristics (MRC)
STYLE DESIGNATORNONSHRINKABLEFLIS characteristics (MRC)
DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS200.0 VOLTS PER MIL /0.001 INCH/FLIS characteristics (MRC)
Staying inside the regulation — routes from candidate to approved
Codification and qualification say who vouches for a part — they are not installation eligibility. Under EASA Part-21, eligibility flows from the approved design (type design / IPC) or an approved change; under Part-145, acceptance needs an EASA Form 1 or, for genuine standard parts, conformity traceable to the officially recognised standard (145.A.42).
- Classify the part. Is it a GENUINE standard part? If the IPC/CMM references only a public specification (AN/MS/NAS/SAE-AS/ISO/EN) with no OEM source-control drawing, buy at source with conformity traceable to that standard.
- Check for an approved alternate. The IPC/CMM/vendor list may already carry an alternate part number or vendor code — an already-approved alternate needs no new approval.
- Ask the design approval holder. Request the source-control data, written equivalence, or addition of the alternative source to the approved data. Document a refusal.
- Raise a design change. Via a Part-21J DOA (or EASA/ADOA): a 21.A.95 minor change adding the alternate to the approved data, backed by an identicality/equivalence file — dimensions, material, class, load rating, lubricant/seal, corrosion protection, acceptance criteria. Critical applications escalate to major change/STC.
- FAA-PMA / BASA path. Where the product is also FAA-certificated: PMA parts reach EASA aircraft under the BASA/TIP (non-critical directly; critical via EASA-validated STC).
- Production, release, traceability. Approved parts are produced under a POA, released on an EASA Form 1 (marked EPA where applicable), with EN/AS 9120-grade traceability into Part-145/CAMO acceptance.
Stage 1(a): we assemble the equivalence/identicality starter file — the cited evidence this graph holds, shaped for your DOA or compliance department to take forward. See pricing.
Regulatory explainer, not legal advice: paragraph numbers, derogations and the BASA/TIP revision change — verify against the current consolidated Regulation (EU) 748/2012, the EASA Easy Access Rules and the current TIP, and engage your DOA and competent authority early.