EASTMAN TURBO OIL 2389 EASTMAN CHEMICAL COMPANY
CONFIRMEDLUBRICATING OIL,AIRCRAFT TURBINE
NSN 9150-00-782-2627
VISCOSITY AT RATED TEMP: 3.00 MINIMUM 210 DEG FAHRENHEIT MINIMUM FLASH POINT AND TEST METHOD: 410.0 FAHRENHEIT CLEVELAND OPEN CUP
Consumables & expendables · Spec-Crosswalk
LUBRICATING OIL,AIRCRAFT TURBINE
Stock number · interchangeable / substitutable per the NSN catalogue (FLIS I&S) — every member CONFIRMED
← Search another part, spec or stock number
Purchasable unitnone derived yet
Part number3 approved sources
You are here · Stock number9150-00-782-2627
Specificationnone cited
Approved sources and substitutes
Every maker's item codified on this stock number, with the catalogue's order of use.
MIL-L-7808 MILITARY SPECIFICATIONS
CONFIRMEDLUBRICATING OIL,AIRCRAFT TURBINE
NSN 9150-00-108-5359
VISCOSITY AT RATED TEMP: 3.00 MINIMUM 210 DEG FAHRENHEIT MINIMUM FLASH POINT AND TEST METHOD: 410.0 FAHRENHEIT CLEVELAND OPEN CUP
MILL7808E MILITARY SPECIFICATIONS
CONFIRMEDLUBRICATING OIL,AIRCRAFT TURBINE
NSN 9150-00-270-0056
VISCOSITY AT RATED TEMP: 3.00 MINIMUM 210 DEG FAHRENHEIT AND 11.00 MINIMUM 100 DEG FAHRENHEIT MINIMUM FLASH POINT AND TEST METHOD: 400.0 FAHRENHEIT CLEVELAND OPEN CUP
Stated characteristics
The codification record's own dimensions and material statements — official, and public by nature.
SERVICE CHARACTERISTICSANTIFOAM AND CORROSION RESISTIVE AND OXIDATION RESISTANTFLIS characteristics (MRC)
QUANTITY WITHIN EACH UNIT PACKAGE1.000 QUARTSFLIS characteristics (MRC)
VISCOSITY AT RATED TEMP3.00 MINIMUM 210 DEG FAHRENHEITFLIS characteristics (MRC)
MINIMUM FLASH POINT AND TEST METHOD410.0 FAHRENHEIT CLEVELAND OPEN CUPFLIS characteristics (MRC)
SPECIAL FEATURESSUPER CLEAN GRADE 3FLIS characteristics (MRC)
Take the family with you
The whole group as CSV — members, makers, stock numbers and order of use.
Export paused
The monthly allowance for this address is used — the pattern reads as catalogue work, not a line to settle.
Whole-catalogue work is what Stage 1(a) is for: every line human-checked against the cited evidence, discrepancies annotated, back inside 24 hours. Free searching stays free — this gate only catches bulk pulls.
Staying inside the regulation — routes from candidate to approved
Codification and qualification say who vouches for a part — they are not installation eligibility. Under EASA Part-21, eligibility flows from the approved design (type design / IPC) or an approved change; under Part-145, acceptance needs an EASA Form 1 or, for genuine standard parts, conformity traceable to the officially recognised standard (145.A.42).
- Classify the part. Is it a GENUINE standard part? If the IPC/CMM references only a public specification (AN/MS/NAS/SAE-AS/ISO/EN) with no OEM source-control drawing, buy at source with conformity traceable to that standard.
- Check for an approved alternate. The IPC/CMM/vendor list may already carry an alternate part number or vendor code — an already-approved alternate needs no new approval.
- Ask the design approval holder. Request the source-control data, written equivalence, or addition of the alternative source to the approved data. Document a refusal.
- Raise a design change. Via a Part-21J DOA (or EASA/ADOA): a 21.A.95 minor change adding the alternate to the approved data, backed by an identicality/equivalence file — dimensions, material, class, load rating, lubricant/seal, corrosion protection, acceptance criteria. Critical applications escalate to major change/STC.
- FAA-PMA / BASA path. Where the product is also FAA-certificated: PMA parts reach EASA aircraft under the BASA/TIP (non-critical directly; critical via EASA-validated STC).
- Production, release, traceability. Approved parts are produced under a POA, released on an EASA Form 1 (marked EPA where applicable), with EN/AS 9120-grade traceability into Part-145/CAMO acceptance.
Stage 1(a): we assemble the equivalence/identicality starter file — the cited evidence this graph holds, shaped for your DOA or compliance department to take forward. See pricing.
Regulatory explainer, not legal advice: paragraph numbers, derogations and the BASA/TIP revision change — verify against the current consolidated Regulation (EU) 748/2012, the EASA Easy Access Rules and the current TIP, and engage your DOA and competent authority early.
Source: DLA Logistics Information Services (FLIS) · cycle 2026-07 · official codification
This crosswalk identifies candidate equivalents with cited evidence. It is not an airworthiness approval. Substitution decisions remain subject to your organisation’s procurement and engineering approval process and the governing maintenance data (AMM/CMM/SRM/CML/OMAT).