Consumables & expendables · Spec-Crosswalk
Stock number · one item of supply — the parts codified against it, and the stock numbers it substitutes for
← Search another part, spec or stock number
Every maker's reference the catalogue files against this item of supply — the parts someone holding this number can use. The design-control reference is the one that controls the item; a secondary reference is a real codified fact and a weaker one.
OEM source-control number — the OEM’s own reference for this item; the sources beneath answer it. All of this OEM’s references →
SHIM STOCK,LAMINATED
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
SHIM STOCK,LAMINATED
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
SHIM STOCK,LAMINATED
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
SHIM STOCK,LAMINATED
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
SHIM STOCK,LAMINATED
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
SHIM STOCK,LAMINATED
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
SHIM STOCK,LAMINATED
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
SHIM STOCK,LAMINATED
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
Specifications and drawings the catalogue records against this number. These are what the parts above are made to — never alternatives to them.
Numbers the catalogue records against this item but marks as not for procurement — withdrawn entries, information-only listings, drawings, and references that need more than the number to identify the item. If you arrived holding one of these, this is the item it points to; the sources above are what can actually be used.
SHIM STOCK,LAMINATED
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
SHIM STOCK,LAMINATED
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
Codified interchangeability across stock numbers (FLIS I&S), with the catalogue's order of use where it states one.
OEM source-control number — the OEM’s own reference for this item; the other members are its approved sources per codification. All of this OEM’s references →
SHIM STOCK,LAMINATED
NSN 9535-00-618-8109
CROSS-SECTIONAL WIDTH: 24.000 INCHES NOMINAL LENGTH: 4.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.0320 INCHES NOMINAL LAMINATION THICKNESS: 0.003 INCHES NOMINAL
SHIM STOCK,LAMINATED
NSN 9535-00-826-8528
SHIM STOCK,LAMINATED
NSN 9535-00-006-8544
WIDTH: 24.000 INCHES NOMINAL LENGTH: 72.000 INCHES NOMINAL CROSS-SECTIONAL THICKNESS: 0.0400 INCHES NOMINAL LAMINATION THICKNESS: 0.003 INCHES NOMINAL
The whole group as CSV — members, makers, stock numbers and order of use.
Export paused
The monthly allowance for this address is used — the pattern reads as catalogue work, not a line to settle.
Whole-catalogue work is what Stage 1(a) is for: every line human-checked against the cited evidence, discrepancies annotated, back inside 24 hours. Free searching stays free — this gate only catches bulk pulls.
Codification and qualification say who vouches for a part — they are not installation eligibility. Under EASA Part-21, eligibility flows from the approved design (type design / IPC) or an approved change; under Part-145, acceptance needs an EASA Form 1 or, for genuine standard parts, conformity traceable to the officially recognised standard (145.A.42).
Stage 1(a): we assemble the equivalence/identicality starter file — the cited evidence this graph holds, shaped for your DOA or compliance department to take forward. See pricing.
Regulatory explainer, not legal advice: paragraph numbers, derogations and the BASA/TIP revision change — verify against the current consolidated Regulation (EU) 748/2012, the EASA Easy Access Rules and the current TIP, and engage your DOA and competent authority early.
Source: DLA Logistics Information Services (FLIS) · cycle 2026-07 · official codification
This crosswalk identifies candidate equivalents with cited evidence. It is not an airworthiness approval. Substitution decisions remain subject to your organisation’s procurement and engineering approval process and the governing maintenance data (AMM/CMM/SRM/CML/OMAT).