010134078 DEFENSE LOGISTICS AGENCY DBA (14153)
WITHDRAWNPLATE,METAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
Consumables & expendables · Spec-Crosswalk
PLATE,METAL
Stock number · one item of supply — the parts codified against it, and the stock numbers it substitutes for
← Search another part, spec or stock number
Purchasable unitnone derived yet
Part number13 approved sources
You are here · Stock number9535-01-465-0627
Specificationnone cited
Approved sources
Every maker's reference the catalogue files against this item of supply — the parts someone holding this number can use. The design-control reference is the one that controls the item; a secondary reference is a real codified fact and a weaker one.
No approved sources recorded against this stock number yet.
What defines this item
Specifications and drawings the catalogue records against this number. These are what the parts above are made to — never alternatives to them.
- ASTM B209 — ASTM
- ASTM B928 — ASTM (specification · not yet a document in the graph)
- MS90514-085 — Military Standards (MS) (specification · not yet a document in the graph)
- QQ-A-250/20 — Federal Specifications (specification · not yet a document in the graph)
Historical & informational references
Numbers the catalogue records against this item but marks as not for procurement — withdrawn entries, information-only listings, drawings, and references that need more than the number to identify the item. If you arrived holding one of these, this is the item it points to; the sources above are what can actually be used.
Substitutes — other stock numbers
Codified interchangeability across stock numbers (FLIS I&S), with the catalogue's order of use where it states one.
010122361 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0627
WIDTH: 72.000 INCHES NOMINAL LENGTH: 20.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.2500 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5086
010122367 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0632
WIDTH: 60.000 INCHES NOMINAL LENGTH: 29.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.3750 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5086
010122373 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0638
WIDTH: 60.000 INCHES NOMINAL LENGTH: 20.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.5000 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5086
010122383 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0642
WIDTH: 60.000 INCHES NOMINAL LENGTH: 20.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 1.0000 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5086
010122396 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0681
WIDTH: 24.000 INCHES NOMINAL LENGTH: 30.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.2500 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5456
010122404 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0684
WIDTH: 72.000 INCHES NOMINAL LENGTH: 20.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.2500 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5456
010122406 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0695
WIDTH: 86.000 INCHES NOMINAL LENGTH: 25.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.2500 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5456
010122412 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0701
WIDTH: 66.000 INCHES NOMINAL LENGTH: 25.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.7500 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5456
010122428 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDSHEET,METAL
NSN 9535-01-465-0700
WIDTH: 72.000 INCHES NOMINAL LENGTH: 20.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.1900 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5086
010122437 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDSHEET,METAL
NSN 9535-01-465-0704
WIDTH: 60.000 INCHES NOMINAL LENGTH: 15.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.190 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5456
010123423 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0706
WIDTH: 66.000 INCHES NOMINAL LENGTH: 25.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.3130 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5456
010134078 DEFENSE LOGISTICS AGENCY DBA
CONFIRMEDPLATE,METAL
NSN 9535-01-465-0708
WIDTH: 66.000 INCHES NOMINAL LENGTH: 25.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 2.5000 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 5456
ASTM B209 AMERICAN SOCIETY FOR TESTING AND
CONFIRMEDSHEET,METAL
NSN 9535-00-085-4277
WIDTH: 36.000 INCHES NOMINAL LENGTH: 6.000 FEET NOMINAL CROSS-SECTIONAL THICKNESS: 0.080 INCHES NOMINAL MATERIAL: ALUMINUM ALLOY 3003
Stated characteristics
The codification record's own dimensions and material statements — official, and public by nature.
FABRICATION METHODROLLEDFLIS characteristics (MRC)
WIDTH66.000 INCHES NOMINALFLIS characteristics (MRC)
LENGTH25.000 FEET NOMINALFLIS characteristics (MRC)
CROSS-SECTIONAL THICKNESS2.5000 INCHES NOMINALFLIS characteristics (MRC)
BASIC SHAPE STYLESOLIDFLIS characteristics (MRC)
WEIGHT PER UNIT MEASURE34.560 POUNDS PER SQUARE FOOTFLIS characteristics (MRC)
MINIMUM TENSILE STRENGTH41000 POUNDS PER SQUARE INCHFLIS characteristics (MRC)
MINIMUM YIELD STRENGTH29000 POUNDS PER SQUARE INCHFLIS characteristics (MRC)
SPECIAL FEATURESDO NOT DUPE TO NSN 9535-01-013-4078. THIS NSN FOR PEARL HARBOR USE ONLY. THIS IS A NON-STANDARD UNIT-OF-ISSUEFLIS characteristics (MRC)
HEAT TREATMENTH-116 SPECIALLY TREATEDFLIS characteristics (MRC)
MATERIALALUMINUM ALLOY 5456FLIS characteristics (MRC)
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B928 ASSN STD SINGLE MATERIAL RESPONSEFLIS characteristics (MRC)
Take the family with you
The whole group as CSV — members, makers, stock numbers and order of use.
Export paused
The monthly allowance for this address is used — the pattern reads as catalogue work, not a line to settle.
Whole-catalogue work is what Stage 1(a) is for: every line human-checked against the cited evidence, discrepancies annotated, back inside 24 hours. Free searching stays free — this gate only catches bulk pulls.
Staying inside the regulation — routes from candidate to approved
Codification and qualification say who vouches for a part — they are not installation eligibility. Under EASA Part-21, eligibility flows from the approved design (type design / IPC) or an approved change; under Part-145, acceptance needs an EASA Form 1 or, for genuine standard parts, conformity traceable to the officially recognised standard (145.A.42).
- Classify the part. Is it a GENUINE standard part? If the IPC/CMM references only a public specification (AN/MS/NAS/SAE-AS/ISO/EN) with no OEM source-control drawing, buy at source with conformity traceable to that standard.
- Check for an approved alternate. The IPC/CMM/vendor list may already carry an alternate part number or vendor code — an already-approved alternate needs no new approval.
- Ask the design approval holder. Request the source-control data, written equivalence, or addition of the alternative source to the approved data. Document a refusal.
- Raise a design change. Via a Part-21J DOA (or EASA/ADOA): a 21.A.95 minor change adding the alternate to the approved data, backed by an identicality/equivalence file — dimensions, material, class, load rating, lubricant/seal, corrosion protection, acceptance criteria. Critical applications escalate to major change/STC.
- FAA-PMA / BASA path. Where the product is also FAA-certificated: PMA parts reach EASA aircraft under the BASA/TIP (non-critical directly; critical via EASA-validated STC).
- Production, release, traceability. Approved parts are produced under a POA, released on an EASA Form 1 (marked EPA where applicable), with EN/AS 9120-grade traceability into Part-145/CAMO acceptance.
Stage 1(a): we assemble the equivalence/identicality starter file — the cited evidence this graph holds, shaped for your DOA or compliance department to take forward. See pricing.
Regulatory explainer, not legal advice: paragraph numbers, derogations and the BASA/TIP revision change — verify against the current consolidated Regulation (EU) 748/2012, the EASA Easy Access Rules and the current TIP, and engage your DOA and competent authority early.
Source: DLA Logistics Information Services (FLIS) · cycle 2026-07 · official codification
This crosswalk identifies candidate equivalents with cited evidence. It is not an airworthiness approval. Substitution decisions remain subject to your organisation’s procurement and engineering approval process and the governing maintenance data (AMM/CMM/SRM/CML/OMAT).