Codified — the stock numbers
The codification catalogue keys on the item of supply — each stock number opens the catalogue's own family, with approved sources and order of use.
NSN5970-00-076-1599FLIS
NSN5970-00-117-5247FLIS
NSN5970-00-117-5258FLIS
NSN5970-00-117-5388FLIS
NSN5970-00-151-4882FLIS
NSN5970-00-281-0903FLIS
NSN5970-00-281-0905FLIS
NSN5970-00-284-4297FLIS
NSN5970-00-284-7227FLIS
NSN5970-00-284-8668FLIS
NSN5970-00-296-1451FLIS
NSN5970-00-501-4597FLIS
Approved alternates — codified interchangeability (FLIS I&S)
Order of use is the catalogue's, not ours. Every member opens its own part-number family.
NSN 5970-00-117-5272 222-1002P5 RAYTHEON COMPANY
NSN 5970-00-552-9839 426772-6 LOCKHEED MARTIN CORPORATION
NSN 5970-00-552-9840 426773-3 LOCKHEED MARTIN CORPORATION
NSN 5970-00-156-6113 61187 NAVAL SHIP SYSTEMS COMMAND
NSN 5970-00-117-5353 61300 NAVAL SHIP SYSTEMS COMMAND
NSN 5970-00-117-5276 7106963P6 GENERAL ELECTRIC COMPANY
NSN 5970-00-567-2728 914R1733 GENERAL DYNAMICS MISSION SYSTEMS, I
NSN 5970-00-518-3138 E1100 ADVANCED TECHNICAL CERAMICS COMPANY
NSN 5970-00-027-8617 JANI8 JOINT ARMY-NAVY SPECIFICATIONS
NSN 5970-00-117-5273 JANI8TYPENS4W1420 JOINT ELECTRONICS TYPE DESIGNATION
Graded alternates — other manufacturers on the same lines
Products the evidence places against this one, each naming the line that vouches for it. CONFIRMED means every claim cites a source; POSSIBLE is a lead to verify, not a match.
No other maker holds a published citation on these lines yet — coverage grows with each qualified-products cycle.
Staying inside the regulation — routes from candidate to approved
Codification and qualification say who vouches for a part — they are not installation eligibility. Under EASA Part-21, eligibility flows from the approved design (type design / IPC) or an approved change; under Part-145, acceptance needs an EASA Form 1 or, for genuine standard parts, conformity traceable to the officially recognised standard (145.A.42).
- Classify the part. Is it a GENUINE standard part? If the IPC/CMM references only a public specification (AN/MS/NAS/SAE-AS/ISO/EN) with no OEM source-control drawing, buy at source with conformity traceable to that standard.
- Check for an approved alternate. The IPC/CMM/vendor list may already carry an alternate part number or vendor code — an already-approved alternate needs no new approval.
- Ask the design approval holder. Request the source-control data, written equivalence, or addition of the alternative source to the approved data. Document a refusal.
- Raise a design change. Via a Part-21J DOA (or EASA/ADOA): a 21.A.95 minor change adding the alternate to the approved data, backed by an identicality/equivalence file — dimensions, material, class, load rating, lubricant/seal, corrosion protection, acceptance criteria. Critical applications escalate to major change/STC.
- FAA-PMA / BASA path. Where the product is also FAA-certificated: PMA parts reach EASA aircraft under the BASA/TIP (non-critical directly; critical via EASA-validated STC).
- Production, release, traceability. Approved parts are produced under a POA, released on an EASA Form 1 (marked EPA where applicable), with EN/AS 9120-grade traceability into Part-145/CAMO acceptance.
Stage 1(a): we assemble the equivalence/identicality starter file — the cited evidence this graph holds, shaped for your DOA or compliance department to take forward. See pricing.
Regulatory explainer, not legal advice: paragraph numbers, derogations and the BASA/TIP revision change — verify against the current consolidated Regulation (EU) 748/2012, the EASA Easy Access Rules and the current TIP, and engage your DOA and competent authority early.