411634-2000 RAYTHEON COMPANY (96214)
POSSIBLEINSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
Consumables & expendables · Spec-Crosswalk
INSULATION SLEEVING,ELECTRICAL
Stock number · one item of supply — the parts codified against it, and the stock numbers it substitutes for
← Search another part, spec or stock number
Purchasable unitnone derived yet
Part number22 approved sources
You are here · Stock number5970-00-552-0198
Specificationnone cited
Approved sources
Every maker's reference the catalogue files against this item of supply — the parts someone holding this number can use. The design-control reference is the one that controls the item; a secondary reference is a real codified fact and a weaker one.
591-0008-084 THE BOEING COMPANY (94756)
POSSIBLEINSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
FLEXITE HT-105C MARKEL CORP. (03890)
POSSIBLEINSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
ITCO 929 PEXCO LLC (12509)
POSSIBLEINSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
P-105/2-2 MANHATTAN/CDT COLE-FLEX (56352)
POSSIBLEINSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
TURBOLEX 105 PRYSMIAN CABLES AND SYSTEMS USA, LL (71124)
POSSIBLEINSULATION SLEEVING,ELECTRICAL
secondary reference — also codified against this stock number, as a secondary reference (RNCC 5)
NATVAR 400/461 HIGH VOLTAGE ENGINEERING CORP NATVAR (96904)
POSSIBLEINSULATION SLEEVING,ELECTRICAL
codified reference — recorded against this stock number; the catalogue grade is not held
What defines this item
Specifications and drawings the catalogue records against this number. These are what the parts above are made to — never alternatives to them.
- MIL-I-631 — Military Specifications
- SM-A-680085-35 — US Army CECOM (SM- / SC- / A3 drawings) (specification · not yet a document in the graph)
Historical & informational references
Numbers the catalogue records against this item but marks as not for procurement — withdrawn entries, information-only listings, drawings, and references that need more than the number to identify the item. If you arrived holding one of these, this is the item it points to; the sources above are what can actually be used.
3003 MINNESOTA MINING AND MFG CO 3M (75037)
WITHDRAWNINSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
3003 3M CO ADMININISTRATIVE ELECTRONIC & (20999)
WITHDRAWNINSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
ASTRA 703/105 ESSEX GROUP INC SUFLEX/IWP DIV (91094)
WITHDRAWNINSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
GS830L-2000B NORTHROP GRUMMAN SYSTEMS CORPORATION (26512)
WITHDRAWNINSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
TEMFLEX 105C 2 IN BLACK 3M CO ADMININISTRATIVE ELECTRONIC & (20999)
WITHDRAWNINSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
TEMFLEX 105C 2 IN BLACK 3M COMPANY (76381)
WITHDRAWNINSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
TEMFLEX 105C 2 IN BLACK MINNESOTA MINING AND MFG CO 3M (75037)
WITHDRAWNINSULATION SLEEVING,ELECTRICAL
no longer valid — this reference was withdrawn from the catalogue record (RNVC 9) — the history trail: hold it, do not buy to it
Substitutes — other stock numbers
Codified interchangeability across stock numbers (FLIS I&S), with the catalogue's order of use where it states one.
GS830L-12Y NORTHROP GRUMMAN SYSTEMS CORPORATION
CONFIRMEDOEM source-control number — the OEM’s own reference for this item; the other members are its approved sources per codification. All of this OEM’s references →
INSULATION SLEEVING,ELECTRICAL
NSN 5970-00-552-0198
105 3M CO ADMININISTRATIVE ELECTRONIC &
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-778-6107
WALL THICKNESS: 0.035 INCHES NOMINAL INSIDE DIAMETER: 0.875 INCHES NOMINAL COLOR: CLEAR MATERIAL: PLASTIC
4006 HIGH VOLTAGE ENGINEERING CORP NATVAR
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-981-3172
411634-3800 RAYTHEON COMPANY
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-01-079-3882
WALL THICKNESS: 0.025 INCHES NOMINAL DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 800.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.375 INCHES NOMINAL COLOR: BLACK
411634-5000 RAYTHEON COMPANY
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-01-079-3883
WALL THICKNESS: 0.025 INCHES NOMINAL DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 800.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.500 INCHES NOMINAL COLOR: BLACK
460027-09 BAE SYSTEMS INFORMATION AND ELECTRO
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-956-6429
WALL THICKNESS: 0.023 INCHES NOMINAL INSIDE DIAMETER: 0.124 INCHES NOMINAL COLOR: CLEAR MATERIAL: PLASTIC
6735028-3 GENERAL MOTORS CORP
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-777-4367
6746-5-1-20BLK ITT AEROSPACE CONTROLS LLC
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-329-9798
OVERALL LENGTH: 1.200 INCHES NOMINAL WALL THICKNESS: 0.020 INCHES NOMINAL INSIDE DIAMETER: 0.186 INCHES NOMINAL COLOR: BLACK
6746-6-1.5BLK ITT AEROSPACE CONTROLS LLC
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-01-038-0466
OVERALL LENGTH: 1.500 INCHES NOMINAL WALL THICKNESS: 0.020 INCHES NOMINAL INSIDE DIAMETER: 0.162 INCHES MINIMUM AND 0.178 INCHES MAXIMUM COLOR: BLACK
7472368-10 LOCKHEED MARTIN CORPORATION
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-245-3843
WALL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 800.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM COLOR: BLACK
9116C0001-23 LOCKHEED CORP LOCKHEED ELECTRONICS
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-01-092-8215
OVERALL LENGTH: 200.000 FEET MINIMUM AND 220.000 FEET MAXIMUM WALL THICKNESS: 0.017 INCHES MINIMUM AND 0.023 INCHES MAXIMUM INSIDE DIAMETER: 0.229 INCHES MINIMUM AND 0.249 INCHES MAXIMUM COLOR: WHITE
9191136 US ARMY AVIATION AND MISSILE COMMAND
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-816-9263
WALL THICKNESS: 0.013 INCHES MINIMUM AND 0.023 INCHES MAXIMUM INSIDE DIAMETER: 0.182 INCHES MINIMUM AND 0.198 INCHES MAXIMUM COLOR: BLACK MATERIAL: PLASTIC
947095-4107 NORTHROP GRUMMAN SYSTEMS CORPORATIO
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-879-7794
WALL THICKNESS: 0.020 INCHES NOMINAL INSIDE DIAMETER: 0.186 INCHES NOMINAL MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
A5574 GRIMES AEROSPACE COMPANY
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-504-8305
OVERALL LENGTH: 1.000 INCHES NOMINAL WALL THICKNESS: 0.062 INCHES MINIMUM INSIDE DIAMETER: 0.125 INCHES MINIMUM COLOR: BLACK
CVC860-2 TRIUMPH AEROSTRUCTURES, LLC
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-228-9497
WALL THICKNESS: 0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 630.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.500 INCHES MINIMUM AND 0.524 INCHES MAXIMUM COLOR: NATURAL
FLEXITE HT-105C MARKEL CORP.
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-001-9373
WALL THICKNESS: 0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 400.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 2.000 INCHES MINIMUM AND 2.070 INCHES MAXIMUM COLOR: BLACK
MIL1631 MILITARY SPECIFICATIONS
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-222-6611
WALL THICKNESS: 0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS: 1250.0 VOLTS PER MIL /0.001 INCH/ INSIDE DIAMETER: 0.081 INCHES MINIMUM AND 0.089 INCHES MAXIMUM COLOR: WHITE
MM7958 GENERAL MOTORS CORP
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-683-4808
PVC105-12CLEAR BELDEN, INC.
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-778-6247
WALL THICKNESS: 0.016 INCHES NOMINAL INSIDE DIAMETER: 0.085 INCHES NOMINAL COLOR: CLEAR MATERIAL: PLASTIC POLYVINYL CHLORIDE (PVC)
PVC105-1INCLEAR BELDEN, INC.
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-778-6102
WALL THICKNESS: 0.035 INCHES NOMINAL INSIDE DIAMETER: 1.000 INCHES NOMINAL COLOR: CLEAR MATERIAL: PLASTIC
TURB0THERM105-1-4 PRYSMIAN CABLES AND SYSTEMS USA, LL
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-781-8019
WALL THICKNESS: 0.020 INCHES NOMINAL INSIDE DIAMETER: 0.255 INCHES NOMINAL COLOR: CLEAR
TURB0THERM105-10 PRYSMIAN CABLES AND SYSTEMS USA, LL
CONFIRMEDINSULATION SLEEVING,ELECTRICAL
NSN 5970-00-782-8395
WALL THICKNESS: 0.016 INCHES NOMINAL INSIDE DIAMETER: 0.106 INCHES NOMINAL COLOR: CLEAR
Stated characteristics
The codification record's own dimensions and material statements — official, and public by nature.
WALL THICKNESS0.050 INCHES MINIMUM AND 0.070 INCHES MAXIMUMFLIS characteristics (MRC)
RELIABILITY INDICATORNOT ESTABLISHEDFLIS characteristics (MRC)
INSIDE DIAMETER2.000 INCHES MINIMUM AND 2.070 INCHES MAXIMUMFLIS characteristics (MRC)
TEMP RATING-10.0 CELSIUS AND 105.0 CELSIUSFLIS characteristics (MRC)
ENVIRONMENTAL PROTECTIONHEAT RESISTANTFLIS characteristics (MRC)
MINIMUM TENSILE STRENGTH1800 POUNDS PER SQUARE INCHFLIS characteristics (MRC)
FLEXIBILITYFLEXIBLEFLIS characteristics (MRC)
COLORBLACKFLIS characteristics (MRC)
MATERIALPLASTICFLIS characteristics (MRC)
STYLE DESIGNATORNONSHRINKABLEFLIS characteristics (MRC)
DIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS400.0 VOLTS PER MIL /0.001 INCH/FLIS characteristics (MRC)
NONDEFINITIVE SPEC/STD DATA1 CATEGORY AND I CLASS AND U FORM AND C GRADE AND 2IN. SIZE AND UA SUBFORM AND F TYPEFLIS characteristics (MRC)
DEPARTURE FROM CITED DOCUMENTAS MOD BY COLORFLIS characteristics (MRC)
Take the family with you
The whole group as CSV — members, makers, stock numbers and order of use.
Export paused
The monthly allowance for this address is used — the pattern reads as catalogue work, not a line to settle.
Whole-catalogue work is what Stage 1(a) is for: every line human-checked against the cited evidence, discrepancies annotated, back inside 24 hours. Free searching stays free — this gate only catches bulk pulls.
Staying inside the regulation — routes from candidate to approved
Codification and qualification say who vouches for a part — they are not installation eligibility. Under EASA Part-21, eligibility flows from the approved design (type design / IPC) or an approved change; under Part-145, acceptance needs an EASA Form 1 or, for genuine standard parts, conformity traceable to the officially recognised standard (145.A.42).
- Classify the part. Is it a GENUINE standard part? If the IPC/CMM references only a public specification (AN/MS/NAS/SAE-AS/ISO/EN) with no OEM source-control drawing, buy at source with conformity traceable to that standard.
- Check for an approved alternate. The IPC/CMM/vendor list may already carry an alternate part number or vendor code — an already-approved alternate needs no new approval.
- Ask the design approval holder. Request the source-control data, written equivalence, or addition of the alternative source to the approved data. Document a refusal.
- Raise a design change. Via a Part-21J DOA (or EASA/ADOA): a 21.A.95 minor change adding the alternate to the approved data, backed by an identicality/equivalence file — dimensions, material, class, load rating, lubricant/seal, corrosion protection, acceptance criteria. Critical applications escalate to major change/STC.
- FAA-PMA / BASA path. Where the product is also FAA-certificated: PMA parts reach EASA aircraft under the BASA/TIP (non-critical directly; critical via EASA-validated STC).
- Production, release, traceability. Approved parts are produced under a POA, released on an EASA Form 1 (marked EPA where applicable), with EN/AS 9120-grade traceability into Part-145/CAMO acceptance.
Stage 1(a): we assemble the equivalence/identicality starter file — the cited evidence this graph holds, shaped for your DOA or compliance department to take forward. See pricing.
Regulatory explainer, not legal advice: paragraph numbers, derogations and the BASA/TIP revision change — verify against the current consolidated Regulation (EU) 748/2012, the EASA Easy Access Rules and the current TIP, and engage your DOA and competent authority early.
Source: DLA Logistics Information Services (FLIS) · cycle 2026-0 · official codification
This crosswalk identifies candidate equivalents with cited evidence. It is not an airworthiness approval. Substitution decisions remain subject to your organisation’s procurement and engineering approval process and the governing maintenance data (AMM/CMM/SRM/CML/OMAT).